Two-way loudspeakerPrevious page

BCM5-10TW

The BCM5-10TW is an two-way built-in loudspeaker that can be used as a 8 ohms or 70/100 volt loudspeaker. In 8 ohms use, you can connect up to 2 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. For 100 volt use, the BCM5-10TW is equipped with a high-quality 100 volt transformer with several power tappings. Therefore it can be used in projects with high ceilings or places with background noise where a little more power is needed.

The built-in 5” coaxial plastic speaker driver is designed of wide frequency response 80-20kHz what results in a very great sound. To complete the sound, a 1,5” tweeter has been integrated. It makes the BCM5-10TW very suitable for the distribution of microphone calls and background music.

The housing is made of high quality ABS. The woofer is made out of enforced polypropylene, what makes it moisture-proof. The loudspeaker is easy to install, due to its simple, quick mounting system with only 3 screws. These screws are hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design.

Specs

Outside diameter202 mm
Depth98 mm
Cutout180 mm
Woofer size5 inch
Tweeter size1,5 inch
Loudspeaker system2-way
Impedance8 Ohm
Low Impedance dynamic power30W
Applicable in 100VYes
100V transformer power taps1,25W - 2,5W - 5W - 10W
Applicable in 70VYes
70V Transformer power taps0,65W - 1,25W - 2,5W - 5W
Max SPL 1M99 dB
Frequency responce80 - 20 KHz
Vertical dispersion 1000HZ180º
Main construction materialBaffle: ABS Plastic / Grill: Steel
IP Rating50
ColourWhite (RAL 9010)
Mounting systemFlush-mount dog ears
Weight0,8 Kg

Downloads

Technical Sheet BCM Series0.28 MB - pdf
Technical Drawing BCM5-10TW0.36 MB - pdf
More info