One channel 100V Power AmplifierPrevious page

BPA240

The BPA240 is a fully equipped 240 watts constant voltage power amplifier that will meet all of your requirements. It is the device to built larger professional industrial sound applications. Besides high reliability and the basic functions of a power amplifier the BPA240 excels above similar products by the inclusion of its extra technical features, possibilities and protection.

The unit is able to drive 4 ohms or constant voltage loudspeaker lines (50 – 70 –100 volts). The amplifier has an input for background music (with link through).

Specs

19" (483mm wide) rack mountingYes
Height- rack units (1U = 44mm)2U (88mm)
Depth (Built in)358 mm
Depth (incl. front)...
Output Channels1
Output Power240W
Speaker Outputs70V, 100V & 4~16Ω
Volume ControlMaster
XLR input Sensitivity & Impedance±385mV/20KΩ, Balanced XLR
Jack input Sensitivity & Impedance775mV/10KΩ, Unbalanced TRS
XLR output Sensitivity & Impedance±385mV/470Ω, Balanced XLR
Jack output Sensitivity & Impedance775mV/470Ω, Unbalanced TRS
Frequency Response50Hz~16KHz(+1dB, -3dB )
S/N Ratio>90 dB
THDLess than 0.1% at 1KHz, 1/3 rated power
Ground LiftLift the earth line ground by switch GND/lift to “lift" position
CoolingFan automatically start up when temp reaches 55℃
ProtectionOver heat, over load, clip & short circuit
Power Supply~110V/60Hz or ~230V/50Hz
Power Consumption400W
Main Construction MaterialPanel: aluminum plate / Case: steel plate
ColourBlack
Weight13,2 Kg

Downloads

Technical Sheet BPA0.52 MB - pdf
More info