19inch free standing server / data rackPrevious page


This Cabinet can be disassembled, welded parts easily bolt together, IP20 and capacity 400 kg.

A big cabinet and little door space – that’s exactly what the HF Series cabinet was designed for. Thanks to the design of its individual parts and a sophisticated method of assembly using Tap-Tide screws, it has the same high capacity and stability as the welded version.

• 19“ free-standing cabinet with IP20 protection
• Cabinet includes 6 sliding vertical rails for device mounting.
• Cabinet construction:
– Steel frame joined by bolts from welded parts, with removable side panels
– Single door with safety tempered glass 4 mm.
• Max. permissible load of the door is 20 kg.
• Min. thickness of the surface finish is 65 µm.
• These cabinets are intended for installation of data, audio and telecommunication devices and their distribution systems.
• The frame of the cabinet and all the removable parts (side and rear covers, doors…) are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet.
• There is one M8 screw placed on the bottom part of the cabinet as an earthing main point.
• Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet.

Individual HF Series parts are bolted together to form a compact unit with the same maximum loading capacity as a welded cabinet. Most of the parts are joined by Tap-Tite thread-forming screws. This ensures a very high rigidity of the bolted connection even after being disassembled any number of times. The product is supplied assembled and can be moved to difficult to reach places after partial or complete disassembling.

Entry openings for cables (370 x 90 mm) in the rear part of the cabinet are covered with breakout-type blanking panels. To avoid dust penetration, it is possible to seal the cables at the entry opening by a brush strip, eventually just secure by a plastic protective frame (both supplied with the cabinet).
A large opening in the top covered with a breakout-type blanking panel enables mounting and removal of a Boxxline fan unit from outside of the cabinet without a need of using screws.

HF series has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover.

The HF Series has a robust bolted construction. High quality workmanship and up-to-date technology ensure a perfect look of the cabinet.

The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening.

With this cabinet type, it is possible to order a special metal door ready for mounting fan units. For further information ask our sales team.

Prepared for mounting castors (not included) and levelling feet (included).

For other door options like perforated, single or double doors on front or rear ask our sales team.


• Operation environment:
– Office
– The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings).

• Must be protected against:
– Mechanical damage
– Improper handling
– A different usage than the cabinet is intended for

• Improper handling is especially:
– Overloading (maximum recommended load exceeding)
– Device installation that can influence negatively operation and function of the cabinet or the installed equipment
– Change of the construction or design of the cabinet


• To ensure the maximum recommended load, it is necessary to distribute the load equally.
• Place the cabinet on a flat floor and adjust any differences using the levelling feet.
• To avoid dust penetration in the case where cables lead through some of the cable openings, it may be sealed with a blanking panel with a brush or secured by a plastic frame (both are included in the delivery).


• All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations


• This product is certified with ITI TÜV, and is fully in accordance with ČSN EN 62208 ed.2:2012(EN 62208:2011).

This cabinet is available in grey (HF47GR690) or black (HF47BL690)


19" (483 mm wide) server rackYes
Height- rack units (1U = 44mm)47U (2.068mm)
Mounted CabinetYes (Ready to use)
Cabinet could be disassembledYes
Height2.194 mm
Depth900 mm
Width600 mm
Working Depth815 mm
Max Load400 Kg
Vertical Rails for device mounting6 pcs (3 on each side)
IP Rating20
Certified with ITI TÜVYes
Applies to empty enclosuresYes (EN 62208:2011)
Removable sidepanelsYes
Removable backpanelYes
Openings for fan1
Flexible door openingAlmost 180⁰
Keys - front door2 pcs
Keys - rear and side panels2 pcs
Captive nut M616 pcs
Levelling feet incl. nut M104 pcs
Blanking panel with brusch1 pcs
Frame for cable entry 1 pcs
Main Construction Material CabinetSteel sheet
Main Construction Material DoorSafety hardened glass 4 mm thick
Earthing main point1 M8 screw on the bottem
Weight gross108,2 Kg
Weight net.100,9 Kg
Available ColoursGrey (HF47GR690) / Black (HF47BL690)


Technical Sheet HF Series0.33 MB - pdf
Technical Drawing HF Series0.45 MB - pdf
More info

Related products