19inch wall mounted one-sectioned server / data rackPrevious page


One-sectioned welded wall cabinet. IP30, capacity 30 kg.

High quality workmanship and up-to-date technology ensure a perfect look of the cabinet.
The cabinet has fully glass door in standard. It can be steel or perforated if required.
The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening.

It enables an easy and quick access into the cabinet.

One pair of vertical 19“ rails is freely adjustable in any depth of the cabinet. This simplifies mounting of devices and organisation of connecting cables.

Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration.

The HW type has 6 break-out blanking panels for the installation of ventilation units HCVEN03. The HW cabinet provides with a possibility to install an equipment, which has never been cooled enough before. Such equipment could be only installed into free standing cabinets before.

  • 19“ one-sectioned wall-mounted cabinet with IP30 protection
  • Cabinet is to be hanged right on the wall.
  • Cabinet includes two sliding vertical rails.
  • Cabinet construction:– Compact welded cabinet – Safety hardened glass door, thickness 4 mm. On demand may be metal or perforated.
  • Max. permissible load of the door is 10 kg.
  • Min. thickness of the surface finish is 65 µm.
  • Cabinets are intended for installation of data and telecommunication devices and their distribution systems.
  • The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet.
  • There is one M8 screw placed on the bottom part of the cabinet as an earthing main point.
  • Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet.
  • The HW cabinet has several openings in the top and bottom part of the cabinet which allow to install ventilation units and which are covered with break-out blanking panels. OPERATING CONDITIONS

• Operating environment:
– Office
– The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
• Must be protected against:
– Mechanical damage
– Improper handling
– A different usage than the cabinet is intended for
• Improper handling is especially:
– Overloading (exceeding the maximum recommended load)
– Device installation that can influence negatively operation and function of the cabinet or the installed equipment
– Change of the construction or design of the cabinet

• To ensure the maximum recommended load, it is necessary to distribute the load equally.
• Place the cabinet on a flat floor and adjust any differences using the levelling feet.
• To avoid dust penetration in the case where cables lead through some of the cable openings, it may be sealed with a blanking panel with a brush or secured by a plastic frame (both are included in the delivery).

• All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations.

• This product is certified by ITI TÜV, and is fully in accordance with ČSN EN 62208 ed.2:2012(EN 62208:2011).

This cabinet is available in grey (HW09GR60) or black (HW09BL60)


19" (483 mm wide) server rackYes
Height- rack units (1U = 44mm)9U (396mm)
Mounted CabinetYes (Ready to use)
Cabinet could be disassembledNo
Height500 mm
Depth595 mm
Width600 mm
Working Depth540 mm
Max Load30 Kg
Vertical Rails for device mounting2 pcs (1 on each side)
IP Rating30
Certified with ITI TÜVYes
Applies to empty enclosuresYes (EN 62208:2011)
Removable sidepanelsNo
Removable backpanelYes
Openings for fanunit6
Flexible door openingAlmost 180⁰
Keys - front door2 pcs
Captive nut M68 pcs
Blanking panel with brusch1 pcs
Screw 6x504 pcs
Washer 6,64 pcs
Dowel 104 pcs
Main Construction Material CabinetSteel sheet
Main Construction Material DoorSafety hardened glass 4 mm thick
Earthing main point1 M8 screw on the bottem
Weight gross21,1 Kg
Weight net.20,8 Kg
Available ColoursGrey (HW09GR60) / Black (HW09BL60)


Technical Sheet HW Series0.38 MB - pdf
Technical Drawing HW Series0.25 MB - pdf
More info

Related products